YUKIFU / Artist Series / Home
A warm circle of light rests above a body crossed by restless marks. The hollowed gesture of the base interrupts its apparent solidity, making light and absence equally present. Conceived as a domestic companion, the lamp brings the intensity of drawing into a quieter evening register.
Proposed dimensionsApprox. 20 diameter x 32 H cm (assembled)
An object in development. Product and packaging images illustrate the intended direction; final pieces may differ. Not available to order.
01 / The idea behind the object
The shade offers an even, familiar glow while the base carries the nervous register of a drawing. Neither element attempts to resolve the other. The hollow in the body makes absence part of the composition, allowing the lamp to read as more than a support for light. It is conceived for the scale of a table: a small signal within an interior rather than a spectacular object.
02 / Form & material
Design targets, not measurements of finished stock. Dimensions, weight, materials, contents and packaging will be confirmed after physical trials. W = width, D = depth, H = height. Irregular forms are described by their approximate overall dimensions.
03 / Inside the box
A common kraft outer language. Interior support shaped around the needs of this object.
Proposed set: one lamp base, one shade and a care card. Electrical specification and bulb inclusion to be confirmed.
One stock carton, protective packing and a care card are planned. Final accessories and assembly instructions, where applicable, will be specified before release.
Pack the shade and cast base in separate supported compartments. Reinforce the base compartment and keep its weight away from the shade; final electrical parts will need their own retained space.
This is a packing plan, not a validated transit specification.
Shared stock cartons and a single-colour label keep the packaging language consistent without a dedicated luxury box for every form. Smooth surface wrap comes first; folded corrugated pads, dividers and paper cushioning are added where needed.
Heavy or glazed pieces may need a reinforced or double-boxed transit pack. The final choice depends on packed weight and handling trials, not appearance alone.
04 / Living with the object
Care directions and performance limits remain provisional until material and prototype testing are complete.
A table-lamp design study. It is not offered as a working electrical product at this stage. Electrical design, heat behaviour, cord strain relief, stability and applicable product requirements must be resolved before release.
Until the final finish is established, the intended care direction is dry indoor use and gentle dusting with a soft, clean cloth. Lift from the base rather than sliding. Avoid soaking, dishwashers, solvents, abrasive cleaners, prolonged moisture and direct heat. Final product-specific care instructions will accompany any release.
The proposed route begins with a drawing, moves through a three-dimensional model and a printed master, then into a hand-prepared silicone mould. Casting, curing, finishing and physical trials follow. The exact binder, pigment system, sealer and any separate hardware will be selected before the object is offered for sale.
Prototype checks will cover dimensions, flatness or balance, weak edges, contact surfaces and the suitability of the intended function. Packaging trials must check movement inside the carton, surface rubbing and impact protection. Neither the concept images nor the stated price establish tested durability, waterproofing or product certification.
The displayed ₩349,000 is an indicative KRW price, not a checkout offer. Final pricing, delivery charges, lead times and applicable purchase terms will be published before orders open. No payment or reservation is accepted on this page.
